Differentiation of green tea samples by chiral CD-MEKC analysis of catechins content.

A chiral CD-MEKC method, enantioselective for catechin and gallocatechin, was developed, validated and applied to the analysis of tea samples. The method was addressed to the fast and simultaneous quantitation of the most represented and biologically important green tea catechins and methylxanthines. The CD-MEKC was based on SDS as surfactant (90 mM) and hydroxypropyl-beta-CD (25 mM) as chiral selector, under acidic conditions (25 mM borate-phosphate buffer, pH 2.5). The method was first applied to study the thermal epimerisation of epi-structured catechins, (-)-epicatechin and (-)-epigallocatechin, to non-epi-structured (-)-catechin and (-)-gallocatechin. The latter compounds, being non-native molecules, were for the first time regarded as useful phytomarkers of tea samples subjected to thermal treatment. The proposed method was applied to the analysis of more than twenty tea samples of different geographical origins (China, Japan, Ceylon), having undergone different storage conditions and manufacturing processes. Finally, factor analysis was used to visualise the useful information contained in the data set, showing that it was possible to distinguish tea samples on the basis of their different contents of native and non-native catechins.

Study on the photostability of guaiazulene by high-performance liquid chromatography/mass spectrometry and gas chromatography/mass spectrometry.

The photostability of guaiazulene (1,4-dimethyl-7-isopropylazulene; GA), a natural azulenic compound used in cosmetic and health-care products, as well as in pharmaceutical preparations, was investigated in solution (methanol, ethanol, acetonitrile), by different techniques: gas chromatography/mass spectrometry (GC/MS) and high-performance liquid chromatography combined with atmospheric pressure chemical ionization mass spectrometry and UV detection (LC/APCI-MS and HPLC/UV). A solar simulator (xenon-arc lamp) was used as UV-A radiation source. The study involved: monitoring compound decomposition, identifying products of photodegradation (PPs), assessing the role of oxygen and evaluating the kinetics of the process. Minor PPs are volatile compounds and were characterized by GC/MS, while oligomeric polyoxygenated compounds, tentatively characterized on the basis of MS and MS/MS spectra, were found to be the main photoproducts. The photodegradation was found to be enhanced by the presence of oxygen; nevertheless, determination of the singlet oxygen quantum yield for GA gave a lower value than that for the reference standard Rose Bengal. The obtained results and the developed stability-indicating methods (GC/MS and LC/MS) are of interest for stability studies and/or quality control purposes of GA as raw material or cosmetic products.

Guaiazulene in health care products: determination by GC-MS and HPLC-DAD and photostability test.

A liquid chromatographic method with UV detection (HPLC-DAD) and a gas chromatographic method coupled with mass spectrometry (GC-MS) have been developed for the determination of guaiazulene (GA) in complex matrices such as creams and toothpastes. A solid phase extraction (SPE) sample pre-treatment on a polymeric sorbent (Strata-X polymer) was applied before the HPLC analyses, which were performed on a XTerra C8 stationary phase, using a mobile phase consisting of acetonitrile-water 50:50 (v/v). For GC-MS analyses, solid-liquid extraction (creams) and SPE (toothpastes) were applied. The proposed methods, based on techniques with different selectivity, were validated and both proved to be suitable to obtain an unambiguous identification and reliable determination of GA in commercial health care products (creams and toothpastes), giving concordant results. Moreover, the described methods can offer a useful analytical support for photostability studies of GA, a photolabile natural compound, in creams.

Analysis of human histone H4 by capillary electrophoresis in a pullulan-coated capillary, LC-ESI-MS and MALDI-TOF-MS.

The object of the present study was the analysis of the human histone H4 (a core histone) in order to evaluate the state of its acetylation. Capillary electrophoresis (CE) using a pullulan-coated capillary provides a rapid and efficient approach to the separation of monoacetylated, diacetylated and triacetylated H4 isoforms from human cells. By using a simple running buffer of 100 mM triethanolamine-phosphate solution at pH 2.5 and exploiting the effectiveness of pullulan-based coverage in preventing adsorptive phenomena, the separation of the differently acetylated isoforms was achieved in less than 15 min with high efficiency and reproducibility. The proposed method was for the first time applied in the analysis of histone H4 fractions obtained from cell lines treated with different histone deacetylase (HDAC) inhibitors, used as potential anticancer drugs. Matrix-assisted laser desorption ionisation time-of-flight mass spectrometry (MALDI-TOF-MS) analysis demonstrated that the acetylation occurred in the histone H4 tail, whereas the CE separation allowed for a fast determination of the percentages of H4 acetylated isoforms in real samples; the results were in agreement with those obtained from liquid chromatography electrospray ionisation mass spectrometry (LC-ESI-MS) analysis. Therefore, the proposed CE method is a useful complementary support to the hyphenated techniques for the rapid monitoring of the activity of HDAC inhibitors.

Development and characterization of beta-secretase monolithic micro-immobilized enzyme reactor for on-line high-performance liquid chromatography studies.

beta-Site APP cleavage enzyme 1 (BACE-1) is a transmembrane aspartyl protease that cleaves the amyloid-beta precursor protein (APP), which is abundant in neurons. BACE-1 is required for the generation of amyloid-beta (Abeta) peptides implicated in the pathogenesis of Alzheimer's disease (AD). It is widely believed that halting the production of Abeta peptide, by inhibition of BACE-1, is an attractive therapeutic modality for the treatment of Alzheimer's disease. BACE-1 has never been immobilized before. In the present study, for the first time, human recombinant beta-secretase micro-immobilised enzyme reactor (hrBACE-1-micro-IMER) was prepared by using an in situ immobilisation procedure on an ethylendiamine monolithic convective interaction media (EDA-CIM) disk. The activity and kinetic parameters of the hrBACE-1-micro-IMER were investigated by insertion in a HPLC system with fluorescent and mass detection. The micro-IMER was characterized in terms of units of immobilised hrBACE-1 and best mobile phase conditions for activity, by using as substrate casein-FITC and JMV2236, a peptide mimicking the Swedish-mutated APP (amyloid precursor protein) sequence. The characterization of the hrBACE-1-micro-IMER in terms of number of enzymatic active units after covalent linking to the solid matrix was performed by using the JMV2236 peptide as substrate in a HPLC-MS system. JMV2236 was injected into the hrBACE-1-micro-IMER and enzymatically cleaved; the product of the enzymatic cleavage and the remaining non-cleaved substrate were collected on a C18 column trap and switched to the LC-electrospray ionization MS system for kinetic constants determination. Inhibition studies were carried out. The effect of donepezil and pepstatin A, as BACE-1 inhibitors, was evaluated by simultaneous injection of the compounds with the peptidic substrate. The relative IC(50) values were found in agreement with that derived by the conventional fluorescence method, confirming the applicability of this new IMER for on-line inhibition studies. The main advantages of the hrBACE-1-micro-IMER approach over the conventional methods were found to be the increased enzyme efficiency, stability and the decreased time of analysis.

Multiwell fluorometric and colorimetric microassays for the evaluation of beta-secretase (BACE-1) inhibitors.

The amyloid beta (Abeta) peptide is responsible for toxic amyloid plaque formation and is central to the aetiology of Alzheimer's disease (AD). It is generated by proteolytic processing of the amyloid precursor protein (APP) by beta-secretase (BACE-1) and gamma-secretase. Consequently, inhibition of BACE-1, a rate-limiting enzyme in the production of Abeta, is an attractive therapeutic approach to the treatment of Alzheimer's disease. This paper reports on improved microtiter plate-based fluorescence and colorimetric assays for the high-throughput screening (HTS) of BACE-1 inhibitors achieved by employing, for the first time, casein fluorescein isothiocyanate (casein-FITC) and N-alpha-benzoyl-D,L-arginine p-nitroanilide (BAPNA) as substrates, since they are known to be readily available and convenient substrates for proteases. The methods are based on the fluorescence enhancement following casein-FITC proteolysis and the visible absorbance of the p-nitroaniline (pNA) produced by BAPNA hydrolysis, with both reactions catalysed by BACE-1. Casein-FITC is a high-affinity substrate (K (m) = 110 nM) for BACE-1, more so than the Swedish (SW) type peptide (a peptide containing the Swedish mutant of APP, a familiar mutation that enhances Abeta production). BACE-1 catalysis of casein-FITC proteolysis exhibited Michaelis-Menten kinetic. Therefore, it was found that BACE-1 was saturable with casein-FITC that was processed in a time- and pH-dependent manner with greater catalytic efficiency than observed for the SW peptide. The enantioselective hydrolysis of L-BAPNA by BACE-1 was observed. L-BAPNA was hydrolysed ten times more efficiently by BACE-1 than the WT (wild-type peptide). The novel methods were validated using a FRET assay as an independent reference method. Therefore, in order to select new leads endowed with multifunctional activities, drugs for Alzheimer's disease (AD) - potent acetylcholinesterase (AChE) inhibitors - were tested for BACE-1 inhibition using the proposed validated assays. Among these, donepezil, besides being an acetylcholinesterase inhibitor, was also found to be a BACE-1 inhibitor that displayed submicromolar potency (170 nM).

Determination of oxalyl-coenzyme A decarboxylase activity in Oxalobacter formigenes and Lactobacillus acidophilus by capillary electrophoresis.

Oxalyl-coenzyme A decarboxylase (OXC) is a key enzyme in the catabolism of the highly toxic oxalate, catalysing the decarboxylation of oxalyl-coenzyme A (Ox-CoA) to formyl-coenzyme A (For-CoA). In the present study, a capillary electrophoretic (CE) method was proposed for the assessment of the activity of recombinant OXC from two bacteria, namely Oxalobacter formigenes DSM 4420 and Lactobacillus acidophilus LA 14. In particular, the degradation of the substrate Ox-CoA occurring in the enzymatic reaction could be monitored by the off-line CE method. A capillary permanently coated with polyethylenimine (PEI) was used and in the presence of a neutral background electrolyte (50 mM phosphate buffer at pH 7.0), a reversal of the electroosmotic flow was obtained. Under these conditions, the anodic migration of Ox-CoA (substrate) and For-CoA (reaction product) occurred and their separation was accomplished in less than 12 min. The CE method was validated for selectivity, linearity (range of Ox-CoA within 0.005-0.650 mM), sensitivity (LOD of 1.5 microM at the detection wavelength of 254 nm), precision and accuracy. Steady state kinetic constants (V(max), K(m) or k') of OXC were finally estimated for both the bacteria showing that although L. acidophilus LA 14 provided a lower oxalate breakdown than O. formigenes DSM 4420, it could be a potentially useful probiotic in the prevention of diseases related to oxalate.

Characterization of reversible and pseudo-irreversible acetylcholinesterase inhibitors by means of an immobilized enzyme reactor.

The aim of the present study was the application of a human AChE-CIM-IMER (enzyme reactor containing acetylcholinesterase immobilized on a monolithic disk) for the rapid evaluation of the thermodynamic and kinetic constants, and the mechanism of action of new selected inhibitors. For this application, human recombinant AChE was covalently immobilized onto an ethylenediamine (EDA) monolithic Convective Interaction Media (CIM) disk and on-line studies were performed by inserting this IMER into a HPLC system. Short analysis time, absence of backpressure, low nonspecific matrix interactions and immediate recovery of enzyme activity were the best characteristics of this AChE-CIM-IMER. Mechanisms of action of selected reversible inhibitors (tacrine, donepezil, edrophonium, ambenonium) were evaluated by means of Lineweaver-Burk plot analysis. Analyses were performed on-line by injecting increasing concentrations of the tested inhibitor and substrate and by monitoring the product peak area. AChE-CIM-IMER kinetic parameters (Km(app) and vmax(app)) were derived as well as inhibitory constants (Ki(app)) of selected compounds. Moreover, noteworthy results were obtained in the application of the AChE-CIM-IMER to the characterization of the carbamoylation and decarbamoylation steps in pseudo-irreversible binding of carbamate derivatives (physostigmine and rivastigmine). AChE-CIM-IMER appeared to be a valid tool to determine simultaneously the kinetic constants in a reliable and fast mode. The obtained values were found in agreement with those obtained with the classical methods with the free enzyme. Furthermore, after inactivation by carbamates, activity could be fully recovered and the AChE-CIM-IMER could be reused for further studies. Results showed that the AChE-CIM-IMER is a valid tool not only for automated fast screening in the first phase of the drug discovery process but also for the finest characterization of the mode of action of new hit compounds with increased accuracy and reproducibility and with saving of time and materials.

Penicillin G acylase as chiral selector in CE using a pullulan-coated capillary.

In the present study, penicillin G acylase (PGA), an enzyme belonging to the family of hydrolases, has been investigated as chiral selector in CE using the partial filling technique. Owing to the strong disposition of PGA to be adsorbed by the inner capillary wall, permanently coated capillaries were used to diminish both the protein-wall interactions and the EOF. In particular, the silica surface of the capillary was chemically coated by an antiadhesive and an hydrophilic layer of pullulan, a high-molecular-mass homopolysaccharide. The coating procedure consisted in the silanization with glycidoxypropyltrimethoxysilane and the subsequent coupling of the hydroxyl groups of pullulan onto the silanized capillary. Using this approach, a significant EOF suppression was obtained within a wide pH range (pH 3.0-9.0); this result was very important in order to find the suitable conditions for the application of partial filling technique. The optimization of partial filling was carried out by considering the effects of different experimental conditions (buffer pH, PGA concentration, and loading duration), on the migration time and enantioresolution of rac-ketoprofen. Under the selected conditions as: 100 mM sodium phosphate buffer (pH 5.5) containing 240 microM of PGA (partial filling of 120 s at a pressure of 50 mbar), a series of acidic compounds resulted to be enantioresolved in about 10 min. The long-term stability of the proposed coating was evaluated; more than 100 injections were performed without significant loss of reproducibility.

Separation and quantitation of fructose-6-phosphate and fructose-1 ,6-diphosphate by LC-ESI-MS for the evaluation of fructose-1,6-biphosphatase activity.

An LC-ESI-MS method was developed for the identification and quantification of fructose-1,6-biphosphate (F1,6BP) and fructose-6-phosphate (F6P), respectively the substrate and the product of the enzymatic reaction catalysed by fructose-1,6-bisphosphatase (F1,6BPase). F1,6BPase, expressed predominantly in liver and kidney, is one of the rate-limiting enzymes of hepatic gluconeogenesis and has become a target for the development of new drugs for type 2 diabetes. The two sugar phosphates were separated on a Phenomenex Luna NH2 column (150 mm x 2.0 mm id) using the following mobile phase: 5 mM triethylamine acetate buffer/ACN (80:20) v/v in a linear pH gradient (from pH = 9 to 10 in 15 min) at the flow rate of 0.3 mL/min. The detection was performed with an IT mass spectrometer in negative polarity (full scan 100-450 m/z) and in SIM mode on the generated anions at m/z = 339 (F1,6BP) and m/z = 259 (F6P). Under the optimised final conditions, the method was validated for accuracy, specificity, precision (inter- and intradays RSD comprised between 1.0 and 6.3% over the range of concentrations used), linearity (50-400 microM), LODs (0.44 microM) and LOQs (1.47 microM), and the method was applied to F6P determination in the F1,6BPase catalysed hydrolysis of F1,6BP.

Phanquinone as a suitable derivatization reagent in micellar electrokinetic chromatography and HPLC analysis of amino acids.

Phanquinone (chemically: 4,7-phenanthroline-5,6-dione) was applied as an original precolumn derivatization reagent for amino acids followed by separation using MEKC with UV detection (240 nm). The derivatization reaction was carried out at 68 degrees C in the presence of aqueous phosphate buffer (pH 8.0) and it was found to be complete after 30 min. Twelve derivatized standard amino acids were separated in about 22 min under MEKC conditions using sodium cholate (250 mM) as the surfactant in phosphate buffer (20 mM, pH 9.0). The developed method was validated for the analysis of D,L-phosphoserine (D,L-p-Ser) and L-glutamine (L-Gln); good linearity (r > 0.999) was achieved in the calibration range of 0.25-2.5 micromol/mL. The sensitivity of the MEKC method (LOD 0.1 micromol/mL; LOQ 0.25 micromol/mL, RSD% <5.0%, n = 3) was found to be adequate for quantitation of amino acids in pharmaceuticals. Quantitative applications of the validated MEKC method were carried out by the analysis of commercially available oral polyaminoacid formulations (tablets and extemporaneous solutions) containing L-Gln and D,L-p-Ser; the obtained results were found to be in agreement with those from a validated reference RP-HPLC method.

Analysis of catechins in Theobroma cacao beans by cyclodextrin-modified micellar electrokinetic chromatography.

A micellar electrokinetic chromatography (MEKC) method was developed for the quantitation of polyphenols (+)-catechin and (-)-epicatechin (catechin monomers) and the methylxanthine theobromine in Theobroma cacao beans. Owing to the poor stability of catechin monomers in alkaline conditions, a 50 mM Britton-Robinson buffer at a pH 2.50 was preferred as the background electrolyte. Under these conditions, the addition of hydroxypropyl-beta-cyclodextrin (HP-beta-CD) at a concentration of 12 mM to the SDS micellar solution (90 mM), resulted in a cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) endowed with two peculiar advantages compare to the conventional MEKC: (i) strong improvement of separation of the most important phytomarkers of T. cacao and (ii) enantioselectivity toward (+/-)-catechin. In particular, separation of methylxanthines (theobromine and caffeine), procyanidin dimers B1 and B2, and catechins (epicatechin and catechin) was obtained simultaneously to the enantioseparation of racemic catechin within 10min. The enantioselectivity of the method makes it suitable in evaluation of possible epimerisation at the C-2 position of epicatechin monomer potentially occurring during heat processing and storage of T. cacao beans. The extraction procedure of the phytomarkers from the beans was approached using ultrasonic bath under mild conditions optimized by a multivariate strategy. The method was validated for robustness, selectivity, sensitivity, linearity, range, accuracy and precision and it was applied to T. cacao beans from different countries; interestingly, the native enantiomer (+)-catechin was found in the beans whereas, for the first time we reported that in chocolate, predominantly (-)-catechin is present, probably yielded by epimerisation of (-)-epicatechin occurred during the manufacture of chocolate.

Investigation on the photochemical stability of lercanidipine and its determination in tablets by HPLC-UV and LC-ESI-MS/MS.

The photostability of lercanidipine, a dihydropyridine calcium-channel blocker used in the treatment of the hypertension, was studied. Drug substance and its solutions and formulations were exposed to UV-A radiations (solar simulator) and the photodegradation process was monitored by UV spectrophotometry, HPLC and HPLC-mass spectrometry. The effect of the solvent (ethanol and ethanol/PBS 1:1 v/v) on the photodegradation pathway and kinetic was evaluated. Lercanidipine and its photodegradation products were separated by a selective reversed-phase HPLC method and the main photoproducts were characterized by HPLC-MS/MS analysis, using an electrospray ionization source (ESI) and an ion trap analyzer. Photochemical reactions, involved in the photodegradation of lercanidipine, include aromatisation of the dihydropyridine moiety, formation of nitrosoderivatives and N-dealkylation in the side chain. The developed stability-indicating HPLC method was then applied to the quality control of commercially available lercanidipine formulations (tablets).

Analysis of neutral nitromusks in incenses by capillary electrophoresis in organic solvents and gas chromatography-mass spectrometry.

Nitromusks used as fragrances in a variety of personal-care products, cleansers, and domestic deodorants, including incense sticks, are neutral nitro aromatic compounds; some of these have been reported as photosensitizers. In this work, their analysis was performed by capillary electrophoresis (CE) in a methanol-based background electrolyte (BGE). In particular, a 10 mM solution of citric acid in methanol was used; under these conditions the strong suppression of the electroosmotic flow favored the use of negatively charged surfactants as additives for the anodic migration of the studied analytes. To this end, sodium taurodeoxycholate (TDC) was supplemented at high concentration (190 mM) to the organic background electrolyte (BGE), showing strong indication of the ability to give micelle-like aggregates. Since nitromusks are characterized by the presence of a nitroaromatic ring with low charge density, their association with TDC aggregates can be ascribed to donor-acceptor interactions. Separation of musk xylene, musk ketone, and the banned musk moskene and musk ambrette was obtained under full nonaqueous BGE; the addition of relatively small water percentages (15% v/v) was found to be useful in improving the separation of pairs of adjacent peaks. Under optimized conditions (190 mM sodium TDC in methanol-water, 85-15 v/v containing citric acid 10 mM) the system was applied to the analysis of nitromusks in incense sticks extracted with methanol. The results were compared with those obtained by the analysis of the same samples using gas chromatography with mass detector. The expected different selectivity of separation obtained using the two techniques can be useful in the unambiguous determination of the analytes; furthermore, a substantial accord of the preliminary quantitative results achieved with the two methods was assumed as the confirmation of the potential reliability of CE performed with high percentage of organic solvent.

Microemulsion electrokinetic chromatography of corticosteroids. Effect of surfactants and cyclodextrins on the separation selectivity.

The separation of neutral hydrophobic corticosteroids (cortisone, cortisone acetate, hydrocortisone, hydrocortisone acetate, prednisolone and prednisolone acetate) by microemulsion electrokinetic chromatography (MEEKC) was studied. In the preparation of microemulsion, heptane was the solvent, n-butanol the co-surfactant and, as anionic surfactants, sodium dodecyl sulfate (SDS) or taurodeoxycholic acid sodium salt (STDC) were employed. Using an acidic running buffer, (phosphate pH 2.5) a strong suppression of the electroosmotic flow (EOF) was observed; this resulted in a fast anodic migration of the analytes partitioned into the negatively charged microemulsion droplets. Under these conditions, STDC showed better separation of corticosteroids than the conventional SDS; however, the use of a single anionic surfactant did not provide the required selectivity. The addition of the neutral surfactant polyoxyethylene glycol octadecyl ether (Brij 76) significantly altered the migration of each analytes allowing a better tuning of separation; however, in order to obtain adequate resolution between couples of adjacent critical peaks, the addition of neutral cyclodextrins (CDs) was found to be essential. This apparently complex system (CD-MEEKC), was optimized by studying the effect of the most important parameters affecting separation: STDC concentration, Brij 76 concentration, nature and concentration of cyclodextrins. Following a rational step-by-step approach, the optimised conditions providing the complete separation of the analytes were found to be: 4.0% STDC, 2.5% Brij 76, 6.6% n-butanol, 1.36% heptane and 85.54% of a solution 5 mM beta-CD in 50 mM phosphate buffer (pH 2.5). The optimized system was preliminary applied to the detection of corticosteroids related substances at impurity level and it could be considered a useful orthogonal alternative to HPLC methods.

Modified micellar electrokinetic chromatography in the analysis of catechins and xanthines in chocolate.

Modified micellar electrokinetic chromatography (MEKC) analysis of monomeric flavanols (catechin and epicatechin) and methylxanthines (caffeine and theobromine) in chocolate and cocoa was performed by using sodium dodecyl sulfate (SDS) as a principal component of the running buffer. Because of the reported poor stability of catechins in alkaline solutions, acidic conditions (pH 2.5) were chosen and consequently the electroosmotic flow (EOF) was significantly suppressed; this resulted in a fast anodic migration of the analytes partitioned into the SDS micelles. Under these conditions, variations of either pH value in acidic range or SDS concentration, showed to be not suitable to modulate the selectivity. To overcome this limit, use of additives to the SDS-based running buffer was successfully applied and three different systems were optimized for the separation of (+)-catechin, (-)-epicatechin, caffeine, and theobromine in chocolate and cocoa powder samples. In particular, two mixed micelle systems were applied; the first consisted of a mixture of SDS and 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate (CHAPS) with a composition of 90 mM and 10 mM, respectively; the second was SDS and taurodeoxycholic acid sodium salt (TDC) with a composition of 70 mM and 30 mM, respectively. A further MEKC approach was developed by addition of 10 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to the SDS solution (90 mM); it provided a useful cyclodextrin(CD)-modified MEKC. By applying the optimized conditions, different separation profiles of the flavanols and methylxanthines were obtained showing interesting potential of these combined systems; their integrated application showed to be useful for the identification of the low level of (+)-catechin in certain real samples. The CD-MEKC approach was validated and applied to the determination of catechins and methylxanthines in aqueous extracts from four different commercial chocolate types (black and milk) and two cocoa powders.

GC-FID/MS method for the impurity profiling of synthetic d-allethrin.

A GC/FID/MS method was developed for the identification and quantification of d-allethrin (DA) and its major impurities in commercial samples. Optimisation of the experimental conditions was carried out considering such important requirements as resolution, reproducibility, detection limits of 0.1% (m/m) for the impurities, and short analysis time. Under the optimised final conditions the method was validated for specificity, precision (CV% = 0.133 at 2.10 mg/mL and CV% = 0.035 at 3.00 mg/mL), linearity (0-3.00 microg injected), limits of detection (0.09 ng injected) and quantitation (0.28 ng injected), and robustness. The DA related impurities were identified by using a GC/MS method with ion trap mass detection and also by comparison with synthesised standards. The most abundant impurities were crysolactone, allethrolone, chrysanthemic acid, and chloro-derivatives of DA.

Determination of the chiral and achiral related substances of methotrexate by cyclodextrin-modified micellar electrokinetic chromatography.

A cyclodextrin-modified micellar electrokinetic chromatographic (CD-MEKC) method for the determination of the most important potential impurities of methotrexate (MTX): 2,4-diamino-6-(hydroxymethyl)pteridine, aminopterine hydrate, 4-[N-(2-amino-4-hydroxy-6-pteridinylmethyl)-N-methylamino] benzoic acid, 4-[N-(2,4-diamino-6-pteridinylmethyl)-N-methylamino] benzoic acid, and the distomer D-MTX is presented. The MEKC separation of these compounds was optimized by applying a step-by-step approach. The addition of beta-CD to a conventional MEKC system, based on sodium dodecyl sulfate (SDS) as surfactant, showed to be essential for the enantioresolution of racemic MTX as well as for the separation of the achiral impurities. To achieve high-resolution factor between the peaks adjacent to the main component (L-MTX), as required in the analysis of related impurities, the separation conditions were stressed; in particular, the addition of methanol to the CD-MEKC system resulted in a very effective choice. Under the optimized final conditions (100 mM SDS and 45 mM beta-CD in a mixture of 50 mM borate buffer, pH 9.30-methanol (75:25 v/v)), the method was validated showing a general adequate accuracy (93-106% recovery) in the determination of L-MTX related substances at the impurity level of 0.12% w/w with a relative standard deviation (RSD)% lower than 8% (n = 4). The method was successfully applied to the analysis of pharmaceuticals (tablets and injections) which showed to contain the distomer D-MTX as major impurity and aminopterine hydrate as a further related substance in the commercial tablets.

Investigation of the photochemical properties and in vitro phototoxic potential of bumetanide.

The photophysical and photochemical properties of bumetanide, a sulfonamide diuretic drug, have been investigated and the photodegradation of the drug on exposure to UV-B and UV-A radiation monitored by fluorimetric and chromatographic (HPLC) methods. The main photoproducts were isolated by solid-phase extraction and liquid chromatographic procedures, and their structure elucidated by 1H-NMR and mass spectrometry. Bumetanide generates only extremely small quantities of singlet oxygen (1O2) upon irradiation in the presence of oxygen. The in vitro 3T3 N RU phototoxicity test yielded no evidence of phototoxic action.